Step 1: remove lighting towers in the room, the towers will interfere with your when you solve the puzzle. If you are a lazy man, only remove the lighting towers around console.
Step 2: when you removed the lighting device, you can use the console. When use the console, please do not stop dialogues, wait and quick to make a choice and answer the questions. If you click the second dialogue, the console will stop running, you need to destruction the lighting device again.
Step 3: You will find there are three buttons, a series of numbers in the three buttons, please see the followings, choose the correct sequence: 14 XX XX - 49 - XX - 0.02 – XX, you can use three buttons to adjust the matching digital, once match, then enter the portal.
1st position
|
2nd position
|
3rd position
|
2.xx.xx
|
28.xx
|
0.01xxx
|
8.xx.xx
|
49.xx
|
0.02xxx
|
14.xx.xx
|
65.xx
|
0.03xxx
|
How to adjust the matching digital?
1. check out the 2nd position, if the digital is 49.xx ,please
select other position. If the digital is 28.xx,please click <Enhance anti-grav field
fabrication>, if the digital is 65.xx,click<Reduce rampulative induction>
2. check out the 1st position, if the digital is not 14.xx.xx,choose 2nd position click<Enhance anti-grav
field fabrication>, and choose 3rd position click<Boost magneto-harness
magnitude>, then check out 1st position’s digital whether is 14.xx.xx,if not, please do the step again。
3. check out the 3rd position, if the digital is not 0.02xxx,choose 2nd position click<Enhance anti-grav
field fabrication>, and choose 1st position click<Increase cyclospringer
frequency>, then check out 3rd position’s digital whether is 0.02xxx,if not, please do the step again
Step 2: when you removed the lighting device, you can use the console. swtor credits When use the console, please do not stop dialogues, wait and quick to make a choice and answer the questions. If you click the second dialogue, the console will buy swtor credits stop running, you need to destruction the lighting device again.
ReplyDeleteFinally a good description on the proper way to do this. I have had the correct coordinates many times and it still didnt work. Apparently the way you get those coordinates entered is just as important as the right coordinates.
ReplyDelete